32
Victory XL-3
V I I . C O M F O R T A D J U S T M E N T S
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you
hear a click.
2. Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.
POWER SEAT (OPTIONAL)
Your Victory XL-3 may be equipped with a power seat. The power seat actuator is designed to raise or
lower the seat automatically with minimal effort on the part of the operator. See figure 21.
WARNING! The power seat is intended for operation only while your scooter is stationary and on a
level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following rules is vital to your safety:
n
Do not attempt to raise or lower the seat while in motion!
n
Do not operate your scooter with the power seat elevated.
n
It is recommended that the vehicle be driven only with the seat in the lowest position.
To operate your power seat:
1. Ensure the scooter is level and stationary.
2. Toggle on the power seat switch.
3. To raise the power seat, place your hands on the handgrips
and use your thumb to push the right side of the throttle
control lever.
4. Release the throttle control lever when you have attained
your desired height.
5. To lower the power seat, place your hands on the handgrips
and use your thumb to press the left side of the throttle
control lever.
6. Release the throttle control lever when you have attained
your desired height.
7. Ensure your seat is in the lowest position and toggle off
the power seat switch before you attempt to drive your
scooter again.
FIGURE 21. POWER SEAT ACTUATOR