35
Victory XL-3
I X . C A R E A N D M A I N T E N A N C E
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
n
You do not need to lubricate these items, as they are all prelubricated and sealed.
CONSOLE, CHARGER, AND ELECTRONIC CONTROLLER MODULE
n
Keep these areas away from moisture.
n
Before operating your scooter, allow any of these areas to dry thoroughly if they have been exposed to
moisture.
STORAGE
n
Refer to How should I store my Victory XL-3 and its batteries? in V. Batteries and Charging.
FUSES
In the event a fuse should blow (cease to work):
1. Remove the fuse by pulling it straight out of its slot.
2. Examine the fuse to be sure it is blown. See figures 10 and 11.
3. Insert a new fuse of the proper rating.