Pride Jazzy 623, Owner'S Manual

10

www.pridemobility.com

Jazzy 623

I I I .   Y O U R   P O W E R   C H A I R

Manual Freewheel Levers

For your convenience, your power chair is equipped with a manual freewheel lever mounted on each motor. The

levers allow you to disengage the drive motors and maneuver the chair manually.

WARNING! Do not use the power chair while the drive motors are disengaged! Do not 

disengage the drive motors when the power chair is on an incline, as the unit could

roll on its own! Only engage the freewheel mode when on a level surface.

WARNING! It is important to remember that when your power chair is in freewheel

mode, the braking system is disengaged.

To operate the manual freewheel levers:

1. Push down both manual freewheel levers for freewheel mode (drive motor disengaged). 

See figure 4.

2. Pull up both manual freewheel levers for drive mode (drive motor engaged). 

See figure 5.

NOTE: You must turn off the power before disengaging the drive motors; otherwise, you may get an error code

on the controller. To clear this code, turn off the controller and place the power chair in drive mode. Then, turn

on the controller. The error message should be cleared. If it is not, contact your authorized Pride Provider.

NOTE: The power chair will be significantly easier to push with the power off.

WARNING! Avoid applying excessive force to the manual freewheel levers.

WARNING! Do not use your foot to operate the manual freewheel levers. Do not stand on the

manual freewheel levers. Applying excessive force to the manual freewheel levers may result in

damage to the freewheel levers, motors, and brakes.

WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.

Figure 5. Drive Mode (Drive Engaged)

Figure 4. Freewheel Mode (Drive Disengaged)

MANUAL FREEWHEEL LEVER

MANUAL FREEWHEEL LEVER