background image

4

www.pridemobility.com

Jazzy Select 6

I .   I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products Corporation (Pride). The power chair you have purchased combines state-of-
the-art components with safety, comfort and styling in mind. We are confident that these design features will provide you
with the conveniences you expect during your daily activities. Once you understand how to safely operate and care for
your power chair, it should give you years of trouble free operation and service.

Read and follow all instructions, warnings and notes in this manual before attempting to operate your power chair for the
first time. In addition, your safety depends upon you, as well as your Dealer, carer or healthcare professional in using good
judgement.

If there is any information in this manual which you do not understand, or if you require additional assistance for setup
or operation, please contact your authorised Pride Dealer. Failure to follow the instructions in this manual and
those located on your power chair can lead to personal injury and/or damage to the power chair, and may void
the warranty.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter or modify this product or remove or
render inoperable or unsafe any guards shields, or other safety features of this product; fail, refuse or neglect to install any
retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.

SHIPPING AND DELIVERY

Before using your power chair, make sure your delivery is complete as some components may be individually packaged.
If you do not receive a complete delivery, please contact your authorised Pride Dealer immediately. Where damage has
occurred during transport, either to the packaging or content, please contact the delivery company responsible.

INFORMATION EXCHANGE

We want to hear your questions, comments and suggestions about this manual. We would also like to hear about the safety
and reliability of your new power chair, and about the service you received from your authorised Pride Dealer.

Please notify us of any change of address, so we can keep you apprised of important information about safety, new
products and new options that can increase your ability to use and enjoy your power chair. Please feel free to contact us at
the address below:

UK:
Pride Mobility Products Ltd.
Unit 106, Heyford Park Camp Road
Upper Heyford, Oxfordshire  OX25 5HA

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and
we will be glad to send you a new one immediately.

Summary of Contents for Jazzy Select 6












































Reviews: