3
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin .
Please note:
•
Under no circumstances should the extractor be connected to any
gas ventilation system, flue system or hot air ducting system.
•
Do not vent the extractor into an attic or loft space.
•
Only install the extractor in rooms with adequate ventilation.
Remember that the extractor is powerful and whatever air is
extracted needs to be replaced.
•
Do not tile the extractor in. It should be removable for service or
maintenance.
•
If these instructions are ignored and the hood cannot be repaired
if faulty, a replacement is not an option under warranty.
•
Do not use silicone sealant to secure the extractor to the wall.
•
If these instructions are ignored and the hood cannot be repaired if
faulty, a replacement is not an option under warranty.
•
You must be able to isolate the extractor from the mains electrical
supply after installation.
Summary of Contents for PRAE0030
