Lay Foot Platform flat on the ground with Vertical
Support tabs facing upwards.
Attach Vertical Support to Foot Platform using
2-M8x60mm bolts with 3 washers
making sure
the top cross bar of the support is facing forward.
2A NOTE
: Large washer should be positioned
between the Seat Assembly and Foot Platform
as shown in detail.
Assembly Instructions Page 1
Model: PTHO-216
Sky Spy Aluminum Hang-On Stand
A
B
B
A
A
1
WASHER
WASHER
63
2
1
2
2A
WASHER
WASHER
A
A
B
Insert
1-M8 x 80mm bolt
into the Foot Rest from the outside and place a washer on bolt.
Then slide one end of a Platform Assembly Cable onto bolt followed by another washer and
then insert bolt through the Foot Platform as shown above. Repeat same steps for other side
using the remaining
M8 x 80mm bolt
. See detail above.
Lift front of Foot
Platform and slid the
Foot Rest under the
front of Foot Platform .
center washers here
4
3
A
A
D
3
89
A
D
4
89
A
D
A
A
D
D
89
89
89
63
63
63
LARGE
WASHER
LARGE
WASHER
LARGE
WASHER
LARGE
WASHER
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
©2021 (rev. 1/21)
Customer Service Department 1-866-972-6168
www.primaltreestands.com
