PRIMAL TREESTANDS PVHO-211, Instruction And Safety Manual

6a

:  Attach Backpack Straps      to the Foot Platform       section of the assembled Treestand.

6b

:  Lay the center webbing section of the Shoulder Pad section in a “loop” over bottom rear section of Foot 

       Platform       

 STEP 1.

6c

:  Pull both ends of Shoulder Strap section both THROUGH the grating in Foot Platform      and the webbing

       loop.  Center straps evenly and then pull both straps to tighten 

STEP 2.

6d

:  Take the 2 webbing strips and on each front bottom side of Foot Platform      , feed the looped ends through 

       the grating

 STEP 3

. Then feed each opposite, non-looped side of webbing strip through looped end, pull to 

       tighten 

STEP 4.

6e

:  Feed each end of the bottom webbing sections through the “ladder lock” at each end of the padded shoulder 

       strap section.  Note the webbing first feeds through the TOP section of  each ladder lock 

STEP 5

.  Finally,

       weave each lower webbing end back through each BOTTOM section of ladder locks 

STEP 6

  NOTE: Pull 

       straight down to  tighten and secure straps.  To loosen, pull upward on bottom of ladder lock tab.      

Assembly Instructions Page 3

MAKE SURE ALL BOLTS 

ARE TIGHT BEFORE PRO-

CEEDING TO ATTACH TO 

W A R N I N G

6

6a

6b

6c

6d

6e

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

Model: PVLS-211

Blackjack Steel Hang-On Stand

Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO  80120

©2020 (rev. 1/20)

Customer Service Department 1-866-972-6168

www.primaltreestands.com