SET UP INSTRUCTIONS
Step 1:
Remove blind from carry bag. While the blind is still folded, set blind on ground with
the corners pointing up and the hubs facing the down.
Step 2:
Release the blind and let it unfold. The roof hub should be facing up.
Step 3:
While holding a corner of the blind with one hand and the roof hub loop with the other,
pull upwards on the roof hub to expand the roof of the blind.
Step 4:
Lift one edge of the roof up while the other edge is resting on the ground. Grab a hold
of a wall hub loop and pull to expand the wall.
primaltreestands.com
Step 5:
Walk around the blind and expand the remaining walls.
Step 6:
Place blind in the desired location and secure each corner to the ground using the
ground stakes supplied. To reinforce the blind from the wind, attach the tie down
ropes to each wall hub loop and stake to the ground.
WRAITH 270
Hub Style Ground Blind
TREESTANDS
Corners
STEP 1
STEP 2
STEP 3
Roof Hub
Hubs
STEP 4
STEP 5
STEP 6
WARNING: Read all instructions and safety warnings and follow them thoroughly. Failure to follow
these instructions may result in serious injury or death.
