CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.PRIMALVANTAGE.COM
ASSEMBLY INSTRUCTIONS PAGE 1
MODEL: HEH00582
SIDE X SIDE DELUXE 17’ LADDER TREESTAND
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
©2013 (rev. 11/12)
ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED
REAR
NOTE:
Make sure that Platform Supports
F
have the
hole on the side towards the rear.
1. Attach Foot Platform
D
to Platform
Support
F
using
4-M12x60mm Bolts.
NOTE: Make sure that the flat part of the
Platform is in the front.
60
D
F
Hole
Hole
60
D
F
2. Attach remaining Foot Platform
D
to rear
of Platform Support
F
using
4-M12x60mm
Bolts.
NOTE: Make sure that the rounded edges
of both platforms are against each other.
3. Attach sleeved end of each Handle Rail
E
to the
OUTSIDE
of Foot Platform
D
using
1-M12x60mm
Bolt
on each side.
NOTE: Handle Rails are interchangeable.
The welded brace on each Handle Rail can be on
either side.
60
E
D