Distributed by Tahsin Industrial Corp. USA 685 Route 10 East, Randolph, NJ 07869
SEAT CUSHION INSTRUCTIONS
Slot A
Slot B
1. Place Seat Cushion between the
armrests with the straps facing the ground.
Insert the buckle end of the strap through
the armrests and around the handle rail.
2. Insert the loose end of the strap
through the opposite armrest and
around the handle rail.
3. Pull strap underneath seat cushion
and thread through the buckle.
4. Hold Buckle as shown. You
should be able to see two slots A&B.
5. Insert loose strap through Slot A.
6. Continue pulling strap through
Slot A. Insert strap through Slot B.
7. Continue to pull strap until tight.
Pull to tighten
©2013 (rev. 12/12)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.TREESTANDCUSTOMERSERVICE.COM
