1. Turn Foot Platform over, insert the looped ends of the backpack
straps up through the rear frame of the platform .
(See Fig. 1)
2. Insert the other end of the strap back through the loop and pull
tight.
(See Fig. 2)
3. Insert the loose end of the strap through the front of the platform.
(See Fig. 4)
4. Insert the strap end through the slot with the teeth on the clip.
(See Fig. 5)
5. Insert the strap end back through the second slot on the clip.
Pull to tighten.
(See Fig. 6)
6. Follow steps 1- 5 for the other Backpack Strap and your straps
should look like
Fig. 7.
Distributed by Tahsin Industrial Corp. USA 685 Route 10 East, Randolph, NJ 07869
BACKPACK STRAP INSTRUCTIONS
Fig. 1
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 2
©2013 (rev. 12/12)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.TREESTANDCUSTOMERSERVICE.COM
