Distributed by Tahsin Industrial Corp. USA 685 Route 10 East, Randolph, NJ 07869
BACKPACKING INSTRUCTIONS PAGE 1
1. Remove Seat Cushion from Seat Platform. Fold platform
so rail is towards the cable towards the rear of the
platform. Screw the T-Knob back on the bolt. Insert the
quickclip through the tab on the frame.
2. Fold Foot Platform so that the rail is facing away from
the cable towards the front of the platform. Screw the
T-Knob back on the bolt. Insert the quickclip through the
tab on the frame.
3. Place Foot Platform on top and
between the armrests of the Seat
Platform. The folded part of the
support bar should be against the
T-Knob of the Seat Platform.
4. Wrap the Climber Buckles
around the Seat and Foot
Platforms at each corner. This
will hold the platforms together.
©2013 (rev. 12/12)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.TREESTANDCUSTOMERSERVICE.COM
