Distributed by Tahsin Industrial Corp USA, 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 1
MODEL: WMTS-15R
15FT. TRIPOD
3. Slide both halves of Shooting Rail
F
together and secure with
1-M10x30mm bolt
on each side. Set aside for future use.
A
B
40
110
40
1. Slide Left Platform
A
into Right Platform
B
. Use
1-M12x40mm
bolt
on each side of platform. Use
2-M12x110mm bolt
in the middle
of the platform. Set aside for future use.
E
D
G
55
55
2. Attach Seat Back
D
to Seat Platform
E
using
1-M12x55mm
Bolt
on each side.
Attach Armrest
G
to Seat Back
D
and Seat Platform
E
using
2-M12x55mm Bolt
at each connection point.
Set aside for future use.
F
F
30
30
W
T
30
4. Insert the crimped end of Male Brace
T
into the end of Cross
Brace
W
near the pivot point. Insert
1-M10x30mm Bolt
at each
point. Do this for
ALL
remaining Cross Braces.
Set aside for future use.
©2013 (rev. 12/12)
ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED
