Primal Vantage WMTS-15R, Instruction And Safety Manual

Distributed by Tahsin Industrial Corp USA, 685 Route 10 East, Randolph, NJ 07869

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168

WWW.TREESTANDCUSTOMERSERVICE.COM

ASSEMBLY INSTRUCTIONS PAGE 2

MODEL: WMTS-15R

15FT. TRIPOD

5. Turn the assembled platform over so that the top of 

the platform is on the ground.  

Attach Handle Rail

  H  

to the bottom of the assembled 

platform using 

2-M12x65mm Bolts

 for each Handle Rail.

6. With the platform still upside down,  Attach  

Rear Leg Brace

  J  

to the rear of the platform using 

2-M12x75mm Bolts 

for each Rear Leg Brace.

7. Turn the platform upright.

Attach Seat Pedestal

  C  

to the center of the platform 

using 

4-M12x45mm Bolts

.

B

A

C

45

8.  Disassemble the 

RED Bolt with Large Washer.

Place the Large Washer on top of the Seat Pedestal

  C  

. Hold 

the assembled Seat on the Seat Pedestal. Place a metal 

washer onto the 

RED

 bolt, then insert a nylon washer on the 

bolt. Insert the bolt through the Seat Platform, Large Washer, 

and the Seat Pedestal. Place another nylon washer onto the 

bolt, then the last metal washer and tighten the nut.

RED BOLT

C

E

©2013 (rev. 12/12)

A

B

65

H

H

BOTTOM VIEW

A

B

J

J

75

75

BOTTOM VIEW