Cautiously climb to the top of the
treestand. Wrap the strap of the ratchet
around the back of the tree once and
thread through the ratchet.
(See Detailed Ratchet Instructions)
MODEL: PVLS-315
DELUXE LADDERSTAND
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
INSTALLATION INSTRUCTIONS PAGE 2
Distributed by Primal Vantage Company Inc. 150 Morristown Rd. Bernardsville, NJ 07924
5
Move base of ladder toward or
away from the tree slightly in
order to make Platform as
parallel to the ground as
possible.
Apply your full weight to the first
step so it settles into the ground.
5
90º
6
7
8
After the ladder stand has been
secured to the tree with the
installation straps, and the
stabilizer bar has been securely
attached to the tree, continue to
have two people hold the ladder,
climb cautiously up to the
platform. Once you reach the
top,
IMMEDIATELY ATTACH
YOUR SAFETY HARNESS TO
THE TREE.
Keep the tether
strap above your head.
8
6
7
Z
90º
90º
T
9
9
X
Stabilizer Bar and Installation Straps
MUST
be
secured prior to climbing the Ladderstand. Failure
to comply may result in serious injury or death.
W A R N I N G
©2017 (rev. 12/16)
Attach Tiedown Rope
Z
just behind the brace of
the inner part of Stabilizer Bar
Q
.
Position the Stabilizer Bar against the tree and
secure it by wrapping the rope around the back of
the tree once and tie it to itself.
Cross Installation Straps behind
the tree. Attach to the top rung of
the bottom ladder section.
(See
Installation Strap Instructions
.
DO NOT
climb ladder without Stabilizer Bar or
Installation Straps installed. Serious injury or
death may occur if Stabilizer Bar and Installation
Straps are not installed.
W A R N I N G
DO NOT
sit on seat platform until the ratchet and installation straps have been secured.
W A R N I N G
PRIMALVANTAGE.COM
