CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Distributed by Primal Vantage Company Inc. 150 Morristown Rd Bernardsville, NJ 07924
J
H
D
45
Insert the bolt and one washer
through the footrest, insert the
bushing into the foot platform, then
insert the bolt through the foot
platform, then through the ladder.
Insert the last washer onto the bolt
and secure with the nut.
Place Footrest
K
between the ends of Foot
Platform
D
and Top Ladder Section
A
on the
outside of Foot Platform.
Insert 1 73
(M12x70mm Bolt w/3 washers)
through Top Ladder Section, through Foot
Platform, then through Footrest.
(See Right Side Closeup)
D
K
A
73
73
Attach Handle Rail
E
to Top Ladder Section
A
using 1 30
(M10x30mm bolt)
on each side.
E
A
A
30
30
Slide Male Back Brace
J
into
Female Back Brace
H
. Attach
assembled back brace to rear
of Foot Platform
D
using
2 45
(M10x45mm Bolts)
.
NOTE:
Make sure that the
bend of the back brace is
pointing away from the
platform.
©2017 (rev. 12/16)
ASSEMBLY INSTRUCTIONS PAGE 1
MODEL: PVLS-315
DELUXE LADDERSTAND
Remove all contents from packaging and make sure all parts are present before attempting to assemble.
Tighten all bolt connections by hand first and then when fully assembled, go back and tighten with a wrench.
ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED
3
3
1
2
1
2
A
Bolt
Head
Washer
Foot
Platform
Washer
Nut
Footrest
Washer
Right Side
Closeup
WWW.PRIMALVANTAGE.COM
