P r i m a L u c e L a b S p A
A R C O u s e r m a n u a l
5) Type the same Latitude and Longitude in the proper fields and then press the
Connect
icon to start connection
to your mount. You will see a notification to confirm that the mount connection is completed. Press
SAVE
button
to confirm.
6) Click on the
Rotator
section (you can click both on the Rotator shape of the central image or on the Rotator
text in the left column). This will open a popup window where you can see if the rotator is enabled. If it’s not
enables, please click on the
ENABLE ROTATOR
button. Then, if this is the first time you enable ARCO rotator
with your ESATTO or SESTO SENSO 2, please click the
CALIBRATION
button.
Please note: rotator calibra-
tion has to be done every time you enable/disable the ARCO rotator with your ESATTO or SESTO SEN-
SO 2. After you enable and calibrate ARCO the first time, you can keep it enabled and there is no need
to deactivate it. For the same reason, the calibration has to be done again if you mechanically rotate
your ARCO in respect to your focuser.
p a g e 1 0
