P r i m a L u c e L a b i S r l
S p i d e r 2 3 0 u s e r m a n u a l
Then tighten again the F connector until the central part of the cable (the copper core called "hot head") is at the
height of the outside pin.
!
Screw the F-type connector plug on the top of the LNB (be careful that the central part of the coaxial cable, the
copper part, fits perfectly inside the center hole of the LNB connector, then screw the outer ring to secure all).
Then bring the box above the LNB and secure it by inserting to the side the 4 silver M5 screws that you had pre-
viously unscrewed, one for each hole the box has and that has to be set at the 4 tapped holes around the support
of the illuminator.
!
!
!
p a g e
!
2 6
External pin
of F connector
Hot head