P r i m a L u c e L a b S . p . A .
E A G L E L E U s e r M a n u a l
-
change the password of the WiFi network created by EAGLE
By default, EAGLE generates a WiFi network with EAGLExxxxx name (where xxxx is the serial number of your
EAGLE) as reported also in the front part of the EAGLE. Default password is
primalucelab
but you can change it
for your safety.
In order to do this, please click the ADVANCED PARAMETERS button. In the WiFi area, you can see the WiFi net-
work name created by your EAGLE (“AP WiFi”). You can modify the “password” field with the password you prefer
and click OK to confirm (image 51). NOTE: The password has to be 8 characters long, it may contain both letters
and numbers, without spaces.
p a g e 4 4
This way, if you’re using the telescope together with other EAGLE users, only you will be able to access to your
EAGLE AP WiFi network.
Image 51: ADVANCED SETTINGS window
NOTE!
1) after changing the password, you will need to access the WiFi network created by EAGLE again from
your control device.
2) do not lose your password otherwise you will no longer be able to access EAGLE remotely.
