P r i m a L u c e L a b i S r l
S E S TO S E N S O u s e r m a n u a l
Press the + or - button to set the focuser drawtube in the innermost position and press the STOP button when you reach
that position (you don’t need to reach the end of the drawtube travel but you can stop 1 or 2 millimiters before the end) .
Don’t worry what button you use (+ or - is needed only to reach the position, only for calibration).
Attention: please re-
member to stop the motor (by pressing the Stop button) BEFORE it will reach the end of draw tube travel or you may
cause problems to the focuser or to the SESTO SENSO motor.
Press NEXT button.
Press the + or - button (it will be the opposite of the previous step) to set the focuser drawtube in the outermost position
and press the STOP button when you reach that position (you don’t need to reach the end of the drawtube travel but you
can stop 1 or 2 millimiters before the end) . Don’t worry what button you use (+ or - is needed only to reach the position,
only for calibration).
Attention: please remember to stop the motor (by pressing the Stop button) BEFORE it will reach
the end of draw tube travel or you may cause problems to the focuser or to the SESTO SENSO motor.
Press NEXT but-
ton.
p a g e
!
1 0
