Primare SP31.7, User Manual

>

Setting up the speakers

18

The following display confirms that calibration is in progress:

When the calibration is complete the 

SET LEVELS

 menu

shows the level that has been set for each speaker:

To change the speaker levels manually

•

Use the 

INPUT SELECTOR

 on the front panel or the 

A

and 

V

 buttons on the remote control to highlight

OUTPUT LEVELS - MANUAL

 in the 

SET LEVELS

menu and press the 

SELECT 

button on the front panel

or remote control to select it.

The 

SET LEVELS

 menu shows the current speaker levels:

•

With 

MODE

 highlighted use the 

VOLUME

 control on

the front panel or the 

<

 and 

>

 buttons on the remote

control to select the layout you want to define.

•

Use the 

INPUT SELECTOR

 on the front panel or the 

A

and 

V

 buttons on the remote control to highlight each

speaker in turn.

A white noise signal will be played through that speaker, and

you can use the 

VOLUME

 control on the front panel or the

<

 and 

>

 buttons on the remote control to adjust the level.

•

When you have adjusted each speaker to balance the

levels press the 

MENU

 button on the front panel or

remote control to exit.

SETTING THE ANALOGUE INPUT LEVEL

The SP31.7 allows you to adjust the input level to the

analogue-to-digital converter to achieve the best possible

signal-to-noise ratio.

If the ADC input level is set too high clipping will occur on

loud signals, causing distortion. The SP31.7 detects this and

displays a 

Set ADC

 warning on the front panel and on-

screen displays.

To adjust the ADC input level

•

Select an analogue input.

•

Use the 

INPUT SELECTOR

 on the front panel or 

A

and 

V

 buttons on the remote control to highlight 

ADC

INPUT LEVEL

 and press the 

SELECT

 button on the

front panel or remote control to select it.

•

Use the 

VOLUME

 controls on the front panel or the 

<

and 

>

 buttons on the remote control to reduce the level

until the 

SET ADC

 warning stops flashing on the loudest

passages.

•

Press the 

MENU

 button on the front panel or remote

control to return to the 

SETUP MENU

.

§5 Setting up

26/7/02, 12:52 pm

18