GB
| Operating Instructions
11
8.
Technical specifications
Electric pole-mounted chain saw PMAS 750
Rated Voltage
230-240 V~ / 50 Hz
Nominal Consumption
750 W
No-load Speed
6000 min
-1
Guide Bar
203 mm / 8“
Cutting length
ca. 185 mm
Variable height adjustment
von 185 cm bis 268 cm
Working height
bis zu 4 m
Chain speed
11,2 m/s
Oil
90 cm
3
Weight with bar+chain
3,5 kg
Chain type
91PX033X, 91P033X
Guide Bar type
080SDEA041 Oregon
Class of Protection
II
Acoustic capacity level
104,0 dB(A)
K = 2,35 dB
Sound Pressure Level
EN ISO 11680-1:2011
89 dB(A)
K = 3 dB
Vibration
EN ISO 11680-1:2011
2,61 m/s
2
K = 1,5 m/s
2
Noise emission data is in accordance with the German Product Safety Act (ProdSG) and the EC Machinery Directive:
The noise pressure level must be reduced depending on use and the tasks to be completed so that the health of the
operator is not impaired. The sound pressure level may exceed 80 dB (A) during use. If this is the case, sound protec-
tion measures are required for the operator (e.g. the wearing of hearing protection equipment).
Wear hearing protection. The influence of noise can cause hearing loss.
Attention!
The vibration value will change on the basis of the area of application of the electric tool and may lie above the
specified value in exceptional situations.
Warning:
The actual vibration emission value present during use of the machine may deviate from the values indica-
ted in the operating manual or by the manufacturer. In order to be exact, an appraisal of the level of strain for all work
phases during actual use must be considered, e.g. the times that the tool is switched off, idling, and during which it is
not in use. In this way, the level of strain may be reduced significantly during the complete working period.
If the tool is regularly, you should wear anti-vibration gloves and avoid an ambient temperature of 10°C or lower while
working with it.
Create a work plan to spread the use of high-vibration tools across multiple days. Ensure the lowest possible vibra-
tion of the device by completing regular maintenance and stable parts on the device. Replace worn out components
immediately.
The indicated vibration emission value has been measured according to a standardised testing process and may be
used for comparison with another electrical tool.
Attention: Noise protection!
Please observe the local regulations when operating your device.
Summary of Contents for PMAS 750
