[ 17 ] Fatal Vision
®
Roadster Assembly Instructions and Maintenance Guide | © Innocorp, ltd. www.fatalvision.com
FATAL VISION
®
ROADSTER MAINTENANCE [ SINGLE SEATER ]
Crank Bolts Adjustment
Using a 14mm socket, check that the crank bolts are
tight. Be careful not to over tighten. Check the bolts
after every 4 hours of use. to make sure they have not
come loose.
Tire and Wheel Maintenance
The wheels are made out of a robust and flexible
elastomer that allows it to flex if there is impact,
unlike a metal rim that will dent and be damaged
slightly. If you notice any cracks in the edge, it’s time
to replace it. The wheels on Pedal Karts are universal
for the coast wheels and drive wheel. If the wheel
bearings become damaged, replace them as soon as
possible.
The proper tire pressure is 28 PSI for
all wheels.
Underinflation of the tires will make the kart
difficult to pedal and possibly damage the wheel.
DO NOT EXCEED 28 PSI.
Please note that low tire
pressure can also cause an issue by putting stress
on the inner tubes, especially when applying the
brakes to the rear tires. Tires should be checked
before every event.
If tires become worn or damaged, replace them
immediately.
3
4
