background image

PrimeStart 450

Congratulations! You have just purchased the 

PrimeStart 450,

 a keyless entry

and remote engine starter system manufactured by Prime Security. You are

about to experience the convenience and luxury of being able to start your

vehicle engine from the comfort of your home, office, department store or

other remote location.
To benefit fully from the capabilities of your PrimeStart system, we encourage

you to read the Owner's Manual thoroughly 

before

 using the system. If you

should have any problems or questions regarding your PrimeStart system,

consult the dealer from whom you purchased this product. To locate an

authorized Prime dealer, contact Prime Security directly at 1-800-253-0334

(toll-free within the U.S.) or 1-847-215-2233.

Lifetime Warranty

Prime Security guarantees the operation of your PrimeStart control unit and

remote controls for as long as you own your car. (Please refer to your Lifetime

Limited Warranty Card for complete information.) Make sure that you receive

your warranty card from your dealer, complete the required information and

mail the registration portion to Prime Security. You should retain the top

portion of the warranty card for your records.

Remote Controls 

Included with your PrimeStart system are two AviGlo™ 4-button/9-channel

remote controls. Once exposed to light, the AviGlo™ remote control buttons

will glow, making the buttons visible in the dark. 
The remote control (remote) is a miniature transmitter powered by a small 

+12 volt battery. The RangeMaster™ super-heterodyne receiver (installed in

your vehicle) allows your remote to command your system from up to ¼ mile

away.  Obstructions, electrical or radio interference, weather conditions,

window tint or a weak battery can reduce this range. Your remote is the key to 

your PrimeStart system and can be used lock and unlock your doors, "pop"

your trunk, start your engine and control optional accessories. 
The PrimeStart system can accept up to four Prime remote controls. Additional 

remote controls and remote control batteries can be purchased from any

authorized Prime Security dealer, or by calling Prime Security toll-free at

1-800-253-0334 (within the U.S.) or 1-847-215-2233.

2

PrimeStart 450 Owner’s Manual

Summary of Contents for PrimeStart 450

















Reviews: