Prime Security PrimeStart 450, Owner'S Manual

Stealth Coding



 Technology

Stealth Coding™ technology offers the most advanced protection available

against "code-grabbing" devices which thieves may use to record the digital

code transmitted by your remote control.  When you leave the area, thieves

can then play back the code to unlock the doors and deactivate your system.

But Prime Security’s remote controls with Stealth Coding™ randomly change

the code every time you use them, and your system will not respond if any

code is retransmitted. This technology makes code-grabbing devices useless.

Electronic Scan Prevention (ESP)

Your PrimeStart system also includes ESP, which blocks electronic scanner

codes to prevent unauthorized operation of your system.

Instant Remote Control Code Deletion

In the event of a lost or stolen remote control, all remote controls can be

erased from the system’s memory to prevent unauthorized system operation.

(See the "Programming Table for Remote Controls" on  page 12).

One-Step Remote Control Code Learning

The PrimeStart system allows you to add new remote controls in one step. (See 

the "Programming Table for Remote Controls" on page 12).

Valet Switch

The valet switch is a small hidden toggle switch which allows you to control

all of the system’s programmable features. (See the "User-Programmable

Features" on page 10).  This switch can 

only

 be controlled with the use of your 

ignition key.  

NOTE: Be sure to have your dealer show you where the valet switch is located.

3

PrimeStart 450 Owner’s Manual