Prime Security PrimeStart 450, Owner'S Manual

Remote-Controlled Trunk Release Capability

If you have the optional Trunk Release installed, simply press the remote

control TRUNK button for 1-2 seconds to activate your vehicle electronic

trunk release. The trunk will "pop" open (may require an optional relay).

Remote-Controlled Accessory Output

This output allows you to add a remote-controlled optional accessory such as

a window roll-up or fuel door release. To activate your optional accessory, see 

the "Programming Table for Remote Controls" on page 12.

Remote Engine Start - Safety and Counter-Theft

I

CAUTION

: Be sure to read the "WARNING" bulletin on the inside

cover of this manual 

before

 attempting to operate remote start.

Automatic Safety and Counter-Theft Features

Before

 remote starting your  engine, the PrimeStart system will automatically

perform a safety check to ensure the following conditions have been met:

•

Brake pedal is not depressed.

•

Engine and ignition are turned off.

•

Hood is closed.

After

 remote starting your engine, the PrimeStart system will shut off the

engine immediately if the ignition is OFF and any of the following occurs:

•

The hood is opened.

•

The engine RPM rises above preset level.

•

The brake pedal is pressed.

•

The remote control START button is pressed.

•

The 20 or 30 minute programmable run time expired.

Visual Fault Indication

The PrimeStart has a built-in fault detection system that automatically scans all 

of the safety zones, prevents the system from remote starting and provides a

visual indication if a fault is detected. The parking lights will flash 1 time if the 

hood is opened or 3 times if the brake pedal is depressed and will not allow

the engine to start. If this occurs, bring your vehicle to your authorized Prime

Security dealer for service.

6

PrimeStart 450 Owner’s Manual