2. Operating the device safely
Danger: Do not touch exposed cables with your bare hands. This especially applies when opera-
ting the device with an AC mains power supply.
Caution:
* Before starting the device, ensure that the power supply line and the plug are okay.
Notice:
* Do not use electrical devices inside the cooler unless they are recommended by the manufactu-
rer for this purpose.
* Do not place the device near naked flames or other heat sources (heaters, direct sunlight, gas
ovens etc.).
* Danger of overheating!
* Ensure at all times that there is sufficient ventilation so that the heat that is generated during
operating does not build up. Make sure that the device is sufficiently far away from walls and other
objects so that the air can circulate.
* Ensure that the ventilation slots are not covered.
* Do not fill the inner container with ice or fluid.
* Never immerse the device in water.
* Protect the device and the cable against heat and moisture.
Scope of delivery
1. Cooler
2. Connection cable for 12/24 V----connection
3. Connection cable for 220-240 V ~connection
2
