Operation
Before initial use
Note: Before starting your new cooler for the first time, you should clean it inside and outside with
a damp cloth for hygienic reasons.
The lid can be removed, or can be opened from either side in an instant, - left
or right.
Selecting the temperature units
Temperature display units can be swltched between Celsius and Fahrenheit as follows:
* Switch on the cooler.
* Press the “SET”button twice.
* Use the UP+ or DOWN - buttons to select Celsius or Fahrenheit.
The selected temperature unit then appears in the display for a few seconds. The display flashes
several times before it returns to the current temperature.
Energy saving tips
* Choose a well ventilated installation location which is protected against direct sunlight.
* Allow warm food to cool down first before placing it in the device to keep cool.
* Do not open the cooling device more often than necessaıy.
* Do not leave the cooler unit open for longer than necessary.
* Defrost the cooler once a layer of ice forms.
* Avoid unnecessary low temperatures.
6
