20
Time
1.
Highlight “Time” on the MENU control panel and
press
OK
or
►
.
2.
Press
▲
/
▼
to highlight the item: Time Zone, DST,
Date and Time.
3.
Press
OK
or
►
to select an option.
4.
Press
EXIT
to exit.
Time Zone
You can select a time zone from Alaska/ Hawaii/
Pacific/ Mountain/ Central/ Eastern/ Atlantic/
Newfoundland/ Samoa.
)
z
Time zone is selected before you setting up
system date and time.
DST (Daylight Saving Time)
You can select ON or OFF to setup the Daylight
saving time.
Date and Time
You can adjust the system date and time, daylight
saving time, and auto-update time.
)
z
After a power failure or disconnection of the
power, the clock settings will be lost.
z
If you selecting Auto-update time, you should be
not adjusting the date and time.
z
The default is Auto-Update Time.
Set up
Audio
Time
Channel
Caption
Parental
Time Zone Eastern
DST Off
Date and Time
Date and Time
Alaska
Hawaii
Pacific
Mountain
Central
Eastern
Atlantic
Newfoundland
Samoa
9
Introduction
Rear Panel
RF OUT RF IN Y Pb Pr S-video DTV OUT HDMI
DOLBY DIGITAL
USB
(RGB) OUT (OPTICAL)
VIDEO L R
DTV OUT SELECT
YPbPr HDMI RGB S/VIDEO
RESOLUTION SELECT
1080i 720P 480P
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL No.: PHD-205LE
INPUT: AC110V-60Hz-15W
MADE IN CHINA
~AC IN
PrimeDTV 123B
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
AUDIO OUT (Left/Right)
Connect to TV, amplifier, or stereo system.
COMPONENT VIDEO OUT (480P/720P/1080i)
Connect to a TV with Component (Y-Pb-Pr) inputs.
HDMI OUT (480P/720P/1080i)
HDMII output providing a high quality
interface for digital video.
OPTICAL (Digital audio out)
Connect to digital (optical) audio equipment.
RESOLUTION
Change the resolution
depending on TV.
DTV OUT (RGB)
DTV output providing high quality RGB video to PC or TV
monitor using VGA type connector.
RF IN
Air or cable TV antenna connects to this jack.
AC Power Cord
Plug into the power
source.
COMPOSITE VIDEO OUT (480i)
Connect to a TV with composite (VIDEO) input.
S-VIDEO OUT (480i)
Connect to a TV with S-video input.
USB
Use only for update.
DTV SELECT
Select a interface from the
video output.
RF OUT (3Ch/PassThrough)
Connect to TV’s antenna.
