Interpreting the LED Status Lights 7
Section 3: Interpreting the LED
Status Lights
The
LED Status Lights
, located on ADL-100's front panel, can
tell you a lot about what is happening at any given moment
with the operation of the autoloader. To accurately interpret
what is meant when the lights are on, off or flashing, refer to
the following chart:
A. POWER LED
Status
Condition
Off
No Power. Plug in Power Adapter.
On Solid
Power is ON. This is ADL-100's normal
"waiting" mode.
Flashing
Power is ON, but an error condition exists:
a. Didn't pick up a disc
b. Dropped a disc
c. Discs out
d. Robotic arm stalled; probably hit something
while moving. Press any button on Control
Panel to re-try.
B. PAUSE LED
Status Condition
Off
Normal "waiting" mode
On Solid
ADL-100 is paused.
Flashing
ADL-100 is busy; i.e. motors are running,
Laminator is laminating, etc.
510896.qxd 4/15/2004 11:32 AM Page 7
TOC
INDEX
