65
Bravo 4200 Series Disc Publisher Service Manual
2017
29.5
Set
Position Offsets
to
Bottom Drive
and click
Set and Move To
. Picker will lower disc into bottom
drive tray (2
nd
pic). Observe position of drive tray in relation to hovering disc. Determine if drive
needs to move forwards or backwards to center disc in tray.
29.6
Drive adjustment screw is below cover but can still be accessed by a screwdriver coming down at an
angle. Turn screw clockwise to move drive in, counter-clockwise to move drive out. Lower disc into
drive tray again to recheck position. Continue adjusting, if necessary, until disc is centered.
