background image

 

  iii 

Table of Contents

Section 1: Getting Started ...............................................................................1

A.   Note on Model Differences ...............................................................2

B.  Choosing a Good Location ................................................................2

C.  Unpacking and Inspection ................................................................3

D.  Identifying the Parts ...........................................................................4

E.  Loading Media (Discs) .......................................................................6

F.  Installing the Ink Cartridge ...............................................................7

G.  Setup the Optional Kiosk Bin ...........................................................9

Section 2: Creating Discs ..............................................................................10

A.   Tutorial: Copy a Disc  .......................................................................10

B.   Using PTPublisher ............................................................................13

 

B1.  Project Types ...............................................................................13

 

B2.  Steps to Any Project ..................................................................15

 

 

Step 1: Add Data ........................................................................15

 

 

Step 2: Add Print .......................................................................16

 

 

Step 3: Start Project (Summary - Settings) .............................18

 

B3.  Publisher Status .........................................................................21

 

B4.  Backup Project (PC Disc Publisher Only) ..............................22

 

B5.  Rip Audio (PC Disc Publisher Only) ......................................25

 

B6.  PTProtect (PC Disc Publisher Only) .......................................26

C.   Creating a Print Label Using SureThing (PC) ..............................27

D.   Creating a Print Label Using Swift Publisher (Mac) ...................28

E.   Advanced Printer Settings ...............................................................33

F.  Printer Utilities and Cost Estimator...............................................35

G.   Label Design Requirements for other Graphics Programs  .......38

Section 3: Maintenance and Troubleshooting ..........................................39

A.  Interpreting the Publisher’s Indicator Lights ..............................39

B.  Internal Blue LED Lights .................................................................40

C.   Transporting the Publisher ..............................................................40

D.  Performing a Robotic Self-Test ........................................................41

E.  Poor Print Quality - Cleaning the Cartridge ................................42

F.  Technical Support .............................................................................47

Section 4: Technical Specifications .............................................................48
Index .................................................................................................................49

Summary of Contents for DP-4202 XRP

























































Reviews: