Getting Started 7
6. If publishing more than two discs, the Robotic Disc
Transporter will load the Recording Drives with blank
discs from the Input Bin to start recording the next round.
It will then move the second recorded disc from the Output
Bin to the Input Bin so that the printed disc can be placed
in the Output Bin when finished.
7. Once recording has started on the next round, printing will
start with the recorded disc from the previous round. This
simultaneous printing and recording greatly increases the
throughput of your Publisher.
8. Print time varies according to which print mode has been
selected (Section 3-A or 3-D). In most cases, print time
takes no more than 2 minutes. After printing the first disc,
the Publisher's Printer Disc Tray opens automatically. The
Robotic Disc Transporter moves the finished disc to the
Output Bin.
9. The Robotic Disc Transporter will now load the second
recorded disc into the Printer Tray for printing.
10. The process starts over and repeats until all blank discs are
gone or the number you have specified via software are
copied and printed.
11. Now that you understand the order of operation, it is time
to set up your Publisher.
