Creating Discs on a PC
23
Click on the
Disc Publisher XRP
icon with the right mouse
button and select
Printing Preferences
.
NOTE:
Most applications allow you to change these same printer driver
options from their "Print" and/or "Printer Setup" screens. This
means that you don't have to go back to the main printer setup
window each time you want to change a setting or option in the
printer driver. These applications will usually give you the same
choices and options, but in a slightly altered format. Some
applications do not save your printer driver option changes, but
instead only use your changes for the current image or print job.
Paper Size
The paper size option will be set to CD for printing onto
printable surface CDs and DVDs. The remaining options
apply if you have purchased the business card adapter kit.
Non-printable Outer Margin
Adjust this value to print all the way to the outer edge of a CD.
This is useful if you are printing full coverage images. The
lower you set this value the farther to the outer edge of the CD
you will print. Please note that with most media the printable
surface does not extend all the way to the edge of the disc.
Because of this you will not normally set this value to zero. You
may also want to adjust the inner diameter setting found under
the Calibration Options which is explained later in this section.
