52
Maintenance and Troubleshooting
D. MAC SOFTWARE TEST
This will confirm that the hardware, software, and your
computer are all communicating properly. To perform a
software test please do the following:
1.
Launch Discribe.
2.
Click one of the options from the quick-launch menu
(i.e. Data CD).
3.
Click the
Robotics…
button.
4.
Click the
Test Robot
button.
5.
You can select where you want discs to go during the test
and the number of times to repeat the test. Click
Start
. The
Publisher will perform your test.
E. CLEANING THE INK CARTRIDGES
It may be necessary to clean the ink cartridge nozzles if you
notice reduced print quality, or if you suspect an cartridge noz-
zle has become slightly dried out or clogged. If you are having
print quality problems, follow the steps below:
1. Remove the print cartridges.
2. Moisten a lint-free cloth with
water.
3. Hold the cloth against the
nozzles for three seconds.
This will “wick” some
additional ink onto the damp
cloth.
4. Wipe in the direction shown.
5. Repeat the process.
