User Guide for VGS2000 IP Video Phone V01.00
- 17 -
3.
Press the
Edit
soft Key
4.
Select the
Connection
Type
and then select
Static IP
.
5.
Enter the parameters IP, subnet mask, gateway, primary DNS, second DNS in the
corresponding fields.
6.
Press the
Save
soft key to accept the change or the
Cancel
soft key to cancel.
7.
Press the
Back
key to return to the idle screen.
Note
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready to use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to
Account Management
on page
- 30 -
.
Idle Screen
If the phone has successfully started up, the idle screen will appear on the phone LCD
screen as shown below:
Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about these
parameters, contact your system administrator.
