Fit everything. Together.
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
F
1.604.881.7835
www.primex.com
STEP 5
STEP 7
STEP 6
STEP 8
Finish installation
Remove paintshield and
install accessories for
equipment mounting.
Paint drywall and affix enclosure lid
Place paintshield, paint drywall, and install lid and frame.
Enclosure options:
•
Standard
with wide lip to cover drywall cut imperfections
•
Standard deep
(frame extender) retrofit to add 1” more depth
•
Narrow
for shared stud side-by-side mounting and tight corners
•
Narrow deep
for shared stud, tight corners and 1” additional depth
Measure, mark, cut and mount drywall
Use measurements from step 5 to mark out drywall. Cut out marked
area of drywall. Fit drywall over top of the installed enclosure base
and secure.
PRIMEX
MDE Installation Instructions
Measure installation position
Measure distances from edges of enclosure to outside of adjacent
studs, floor and ceiling.
Verge MDE
P2100, P3000, P4200, P6300
452-3113
Narrow
Narrow Deep
Standard Deep
Standard
