18
17
Clearing SD Memory Card
Formatting the SD Card erases all images and data.
To clear photos, see
‘FORMAT’
on page 12.
Active RUN Mode
(Power Saving State)
When on main sliding switch screen, press ‘RUN’ button to start countdown
to camera active ‘RUN’ mode. If menu is left inactive (no settings changed
or button pushed) for 30 seconds, the camera will automatically switch to
“ACTIVE RUN” mode and LCD screen will enter a power saving state.
(
NOTE:
The camera is active and ready to take photos/video when LCD is in a power saving
sleep state.
)
The LCD screen can be awakened by pressing the
POWER
button.
(
NOTE:
The LCD menu will not wake up from Power Saving State while the Green Status Light
is on. Wait until after Green Light turns off to WAKE up LCD screen.
)
Powering Unit OFF
***LCD MUST BE ON TO TURN OFF CAMERA
1.
Wake up LCD screen from power saving mode by hitting
POWER
button
(screen will not come on when Green Status Light is illuminated)
2.
After the LCD screen is on, press and hold the
ON/OFF
button for 2
seconds. Screen should say POWERING DOWN before turning off.
*** If SD card has been used in any other devices, format the card before
use in SUPER MODEL
™
II
.
Image Stamp
Burst Moon Temp Time Date Day Model
