5
*
Attention !
-
Any thermal intervention or welding to the boiler No 1, without being advised by
the manufacturer, is
strictly forbidden.
(In that case, the manufacturer does not have any responsibility).
- Any modification to the technical specifications of the machine(electrical or
mechani- cal) is
strictly forbidden
to the third persons.
(In that case the manufacturer does not have any responsibility).
Fill the feedwater tank of 25lt(No 01) with clear water, using preferably soft water
(up to 8 dh hardness).Turn on the main switch(No 02).Press the button No 03 .The
water pump starts to feed water into the boiler and the lamp No 04 is on. The steam
lamp No 05 will be lighted after a while.During operation the boiler refills
automatically.
Within a few seconds the boiler starts heating the water in order to supply steam in
about 15-20 min. The manometer(No 06) should reach 3,5 bars. The machine is ready
to work.Press the irons button(s)(No 07 ), only one button if the requested produced
steam is for 1 steam iron, or both buttons if the requested produced steam is for 2
steam irons.(That depends on whether you have Ecovapor for steam supply for one
or two irons). Adjust the temperature of the iron using the thermostat knob,
according to the fabric requirements. Adjust the steam quantity by the adjustor knob
(No 08 ) ac- cording to the fabric requirements. You can start ironing!
Operating instructions
