Primus ARCUS200S-BT, User Manual

10

4.1. Pairing your earbuds with a mobile device  

1. Simply take the earbuds out of the charging case, or power them on as it has been indicated 

previously. 

2. Set your Bluetooth

®

 phone to “discover” the wireless earbuds.

3. Place the phone and earbuds within one meter of each other.
4. After both earbuds have synchronized with each other, the LED light on the left earbud will blink 

slowly to indicate that they have entered into the pairing mode. 

5. Select the 

PWH-200

 earphone from the list of newly discovered devices in your phone.

6. Accept by pressing 

Yes 

or 

OK

 on the mobile device. Depending on your Bluetooth

®

 version, you may 

be prompted to enter the passkey 

0000

 (4 zeros). 

7. The 

Connected

 prompt will be heard and both LEDs will go off once the wireless link has been 

successfully established.

Now you can check the battery level on the status bar of your phone.

If after 60 seconds the pairing process fails, please repeat steps 1 through 6 as described above. 

8. The earbuds work seamlessly in either mono or TWS stereo listening.
9. The headset will automatically go into standby mode after a short period of inactivity to save 

battery life. 

10. You only need to pair the earphones with your phone once, as it will re-pair automatically.  
11. The automatic re-pairing feature will allow the headset to be reconnected after being switched 

back on or when placed again within wireless range.  

60 %

AT&T

9:41 AM