background image

SAFETY ALERTS

The safety alert symbol is used in decals and 
with this manual. Understand the safety 
message. It contains important information 
about personal safety.

NOTATIONS

NOTE: 

 General reference information for 

proper operation and maintenance practices.

IMPORTANT: 

Specific procedures or 

information required to prevent damage to 
unit or attachment.

1. DANGER!

SAFETY

WARNING: 

This splitting machine 

is capable of crushing or 
amputating body parts. Failure to 
observe the safety instructions in 
the manuals and on decals could 
result in serious injury or death.
Tragic accidents can occur if the 
operator is not alert to the 
presence of children. Never 
assume that children will remain 
where you last saw them.

Stop engine and allow moving 
parts to stop before leaving 
operator’s position.

Look for these symbols to point 
out important safety 
precautions. They mean:

Attention!

Personal Safety Is 
Involved!

Become Alert! 

Obey The Message!

DANGER: 

IMMINENTLY 

HAZARDOUS SITUATION! If not 
avoided, WILL RESULT in death 
or serious injury.

WARNING: 

POTENTIALLY 

HAZARDOUS SITUATION! If not 
avoided, COULD RESULT in 
death or serious injury.

CAUTION: 

POTENTIALLY 

HAZARDOUS SITUATION! If not 
avoided, MAY RESULT in minor 
or moderate injury. It may also be 
used to alert against unsafe 
practices.

Read the operator’s manual.

Keep children and others away 
from unit while operating.

Only one person should 
operate the log splitter and load 
the logs.

   

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

   

2

Summary of Contents for HCWP1- 26











Reviews: