Printed in USA 1/07 © 2007
2
970-506revB-EN
INSTALLATION
1.
After you have removed the Bagel Saber™ from
the carton, inspect the unit for signs of damage. If
there is damage to the unit:
• Notify carrier within 24 hours after delivery.
• Save carton and packing materials for
inspection purposes.
• Contact your local dealer, or if purchased
directly, the Prince Castle Customer Service
Department at 1-800-722-7853 to arrange for a
replacement to be sent.
2.
Verify that all parts have been received.
3.
Clean Bagel Saber before using.
4.
Prince Castle offers an optional Bagel Catcher
model 970-097 which is designed to work with the
Bagel Saber™ to neatly catch bagel halves. See
figure 1
.
figure 1
5.
To attach the Bagel Catcher, place it up to the far
end of the unit, and slide the open end of the
catcher against the rear opening of the slicer. See
figure 2
.
figure 2
IMPORTANT:
Bagel Catcher is optional and sold
separately.
OPERATION
CAUTION
Blades are extremely sharp. Keep fingers away from
blades.
IMPORTANT:
The Bagel Saber™ is designed to slice
bagels only. Using it to slice other products will
damage the slicer and void the warranty.
1.
Place the Bagel Saber™ on a clean, flat prep
table or counter.
2.
Set the table stop against the front edge of the
table.
3.
Firmly grasp the black stabilizer knob on the
cover, and with your other hand, pull back the
white pusher plate handle. See
figure 3
.
figure 3
4.
Insert the bagel against the pusher plate. See
figure 4
.
figure 4
