Vertical Artisan Toaster
DCFT-MINI-MCD Series
MINI-DCFT-MCD Series
9
Printed in USA 06/04/2019
353-985 Rev. E
Troubleshooting Steps
Master Display Messages
PROBLEM
PROBABLE CAUSE
SOLUTION
Unit will not heat up
No power to unit.
Ensure power cord is connected to
proper receptacle.
Inoperable power cord
Call for service
Loose connection on power switch
Call for service
Inoperable power switch
Call for service
High limit switch tripped
Reset high level switch
Inoperable Temperature Probe
Call for service
Inoperable Platen
Replace Platen.
Unit heats up, but the conveyor does
not run
Loose motor switch connection.
Call for service
Inoperable motor.
Call for service
Inoperable motor switch.
Call for service
Stripped drive gear
Call for service
Loose chain sprockets
Call for service
Unit under-and over-heats, but does
not respond to programming.
Check temperature settings
Adjust temperature set point setting.
See management programming.
Inoperable temperature probe
Call for service
Buns under-or over-done.
Check platen adjustment. See opera-
tion manual
Move platen adjustment knobs to the
correct product part setting.
Check conveyor temperature. From
READY screen, press the INFOR-
MATION button to display the actual
platen temperature.
Adjust temperature set point setting.
See management programming.
Improper toast time.
Adjust toast time as needed.
BURN/ELECTRICAL SHOCK HAZARD!
Platen is HOT and can cause severe burns or severe shock.
Keep hands and objects out of the toaster unit! Failure to exercise caution may result in serious injury!
Turn the unit off, unplug it and let it cool down completely before touching or working on internal apparatus. The
plug removed from the outlet shall remain clearly visible to the operator during the maintenance procedure
WARNING
