FRONT VIEW
PARTS LIST
ITEM
PART NUMBER
DESCRIPTION
1
78-184S
Power and Motor Lighted
Rocker Switch
2
197-185S
Platen Adjustment Knob
(Pkg of 2)
3
70-012
Thermostat Knob
4
197-232
Foot
5
197-124
Conveyor Guide
1
2
3
4
5
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
Unit will not heat up.
No power to unit.
Ensure power cord is connected to
Power rocker switch
proper Receptacle and the power inlet.
light off.
Inoperable power cord.
Replace power cord.
Loose connection on power switch.
Tighten power switch connections.
Inoperable power switch.
Replace power switch.
Unit will not heat up.
Inoperable thermostat.
Replace thermostat.
Power rocker switch light on.
Inoperable platen.
Replace platen.
Unit heats up, but the
Loose motor switch connection.
Tighten motor switch connection.
conveyor does not run.
Inoperable motor.
Replace motor.
Stripped drive gear.
Replace drive gear.
Loose chain sprockets
Adjust and tighten sprockets.
Gears not meshing.
Adjust conveyor set screws (See
Conveyor Adjustments on page 3).
Inoperable motor switch.
Replace switch.
Unit under and over
Inoperable thermostat.
Replace thermostat.
heats (does not respond to
thermostat adjustments).
Buns under or over done.
Check platen adjustment.
Adjust platen for proper compression
(See Platen Adjustments on page 3).
Check platen temperature.
Adjust thermostat for proper temperature.
(See Thermostat Adjustment on page
3).
13
