Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
IRT-SB-NA-1PS
1
6
IRT-SB-NA-3PS
Power off and Unplug the unit
1
Using a Phillips head screwdriver, open the control
side panel. Reference the
Red Arrow
.
2
Remove the (6) connectors from the control board.
Reference the
Black Arrows
.
3
Remove (4) screws to remove the master control
board. Reference the
Blue Arrows
.
4
Remove the Board
5
Remove Main Control Board
#
4
#
4
#
4
# 3
#
3
#
# 3
# 3
# 3
WARNING
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
# 2
#
4
# 3
Install the new board
6
Using the (4) screws removed in step 4, secure the
board onto the electronics tray.
7
Reconnect (6) connections onto board that were re-
moved in step 4.
8
Using a Phillips screwdriver, secure the control side
panel to the unit. Previously opened in step 2.
9
Replace Main Control Board
Plug in unit. Power on and ensure the unit is fully
functional.
10
References
Printed in USA
12
/
3
/2020
353
-
56
7
Rev.
B
