Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
IRT-SB-NA-1PS
1
9
IRT-SB-NA-3PS
Remove Display Assembly
Remove the Main Control Board. Reference the Main
Control Board Removal on Page 15.
2
Unplug the Display Harness. Refer to the
Red Arrow
.
3
Remove the (4) M3 nuts. Lift the display assembly off
the control side panel. Refer to the
Blue Arrows.
4
Reinstall the display assembly by installing the (4) M3
nuts. Previously removed in step 4.
5
Plug in the display harness. Previously removed in step
3.
6
Replace the Main Control Board. Reference the Main
Control Board Replacement on Page 14.
7
Plug in unit. Power on and ensure the unit is fully
functional.
8
Power off and Unplug the unit
1
Replace Display Assembly
WARNING
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
References
# 3
# 4
# 4
# 4
# 4
Printed in USA
12
/
3
/2020
353
-
56
7
Rev.
B
