Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
IRT-SB-NA-1PS
2
2
IRT-SB-NA-3PS
Remove Control Side Bread Selection Board
Power off and Unplug the unit
1
WARNING
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the control
side panel. Reference the
Red Arrow
.
2
Disconnect the harness from the Bread Selection
Board. Reference the
Blue Arrow.
3
Remove (2) Phillips Screws and (2) washers, and
remove the assembly. Reference the
Green Arrows.
4
Install the new Bread Selection Board using (2) Phillips
screws and (2) Washers. Previously removed in step 4.
5
Reinstall the wiring harness onto the Bread Selection
Board. Previously removed in step 3.
6
Using a Phillips head screwdriver, secure the control
side panel. Previously removed in step 2.
7
# 2
References
Plug in unit. Power on and ensure the unit is fully
functional.
8
Replace Control Side Bread Selection Board
# 3
# 3
# 4
Printed in USA
12
/
3
/2020
353
-
56
7
Rev.
B
