Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
IRT-SB-NA-1PS
2
6
IRT-SB-NA-3PS
Remove Power Cord
Unplug the unit
1
WARNING
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the right side
panel. Reference the
Red Arrow
.
2
Remove (3) connections from power cord by removing
the three screws shown, Reference the
Blue Arrow.
3
Reinstall the power cord onto the unit. Tighten the
strain relief bushing. Previously removed in step 4.
5
Reinstall the (3) connections from the power cord on
the points shown. Previously removed in step 3.
6
Using a Phillips head screwdriver, reinstall the right
side panel. Previously removed in step 2.
7
# 2
# 3
# 3
# 3
# 4
Unscrew the back of the strain relief bushing to
release the power cord. Remove the power cord from
the unit completely. Refer to the
Green Arrow
.
4
Re
place
Power Cord
Plug in unit. Power on and ensure the unit is fully
functional.
8
Printed in USA
12
/
3
/2020
353
-
56
7
Rev.
B
