Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
IRT-SB-NA-1PS
2
8
IRT-SB-NA-3PS
Remove Power Switch
Power off and Unplug the unit
1
WARNING
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
Using a Phillips head screwdriver, open the right side
panel. Reference the
Red Arrow
.
2
Remove (4) connectors from the power switch. Note
the wiring configuration. Reference the
Blue Arrows
.
3
Remove the power switch from the unit. There are
two tabs on each side that will need to be released.
4
Reinstall the power switch. The switch is made to snap
in from the outside.
5
Reconnect (4) connectors on the power switch. Refer
to step 3 for the wiring orientation.
6
Using a Phillips head screwdriver, secure the right side
panel. Previously removed in step 2.
7
# 2
# 3
Re
place
Power Switch
Plug in unit. Power on and ensure the unit is fully
functional.
8
Printed in USA
12
/
3
/2020
353
-
56
7
Rev.
B
