537-5
28rev
C-EN
Printed in USA
2/06
© 200
6
6
TOASTER
TX-230
E
BKCE
Programming
Power On/Off
Button
Set Button
Scan Up/Actual Temp
Button
Display
Program LED
Actual Temperature
LED
Setpoint
LED
Scan Down
Button
Control Panel
L O
1
Press the On/Off button.
Conveyor will begin to turn
and the display will read
L
LO
O
.
When the unit reaches its
setpoint temperature, the
display will read
R
RD
DY
Y
.
5 4 0
2
To view the actual temperature, press and release the UP or
DOWN Arrow Button. The display will show the actual platen
temperature for 5 seconds, then change back to
R
RD
DY
Y
.
R D Y
2 8 2
To switch from Fahrenheit to
Celsius, turn the unit off. Press and
hold the DOWN Arrow Button and
turn the unit back on. When you
release the Arrow Button, the dis-
play will be in Celsius.
To switch from Celsius to
Fahrenheit, turn the unit off. Press
and hold the UP Arrow Button when
turn the unit back on. When you
release the Arrow Button, the dis-
play will be in Fahrenheit.
Temperature displayed
in Celsius
R D Y
5 4 5
5 4 0
3
To view the setpoint temperature, press and release the SET
Button. The setpoint LED will glow and the setpoint will be
displayed for 5 seconds, then change back to
R
RD
DY
Y
.
R D Y
5 4 0
4
To change the setpoint temperature, press and hold the SET
Button for 6 seconds. The setpoint and program LED’s will
glow and the setpoint will be displayed.
5 4 5
5
Use the UP or DOWN
Arrow Buttons to
adjust to the desired
setpoint.
Press and release the
SET Button to save the
new setpoint and return
to the operation mode.
